LoginRegister
CITI Universitywww.citi.edu.mn ↗
CITI SCIENCE 
International Scholarly Journal
ISSN (Print): 2788-7685e-ISSN (Online): 2788-7693Published by CITI University
Submit Manuscript

History of developments in geopolymer science in New Zealand: A brief review

Abstract

This brief review highlights key developments in research on the chemistry and applications of aluminosilicate geopolymers conducted at the Department of Chemistry, Victoria University of Wellington, over the past 20 years. As these materials are generally X-ray amorphous, nuclear magnetic resonance (NMR) spectroscopy using the magic-angle spinning (MAS) technique played a unique and important role in their investigation. A wide range of potential applications of geopolymers was explored during this period, including their use as structural materials, catalysts for commercially important organic reactions, bioactive materials, and photoactive materials. Much of the initial research focused on clay-based starting materials because of their high purity. Subsequently, more practical geopolymer materials were developed using industrial processing by-products, including fly ash, blast-furnace slag, and red mud. This body of research resulted in more than 62 publications in international journals, selected examples of which are discussed in this review.

References

1. Davidovits, J. (1991). Geopolymers: Inorganic polymeric new materials. Journal of Thermal Analysis, 37, 1633–1656. https://doi.org/10.1007/BF01912193

2. Kuhl, H. (1908). Slag cement and process of making the same. US Patent 900,939.

3. Barbosa, V. F. F., MacKenzie, K. J. D., & Thumaturgo, C. (2000). Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: Sodium polysialate polymers. International Journal of Inorganic Materials, 2, 309–317. https://doi.org/10.1016/S1466-6049(00)00041-6

4. Barbosa, V. F. F., & MacKenzie, K. J. D. (2003). Synthesis and thermal behaviour of potassium sialate geopolymers. Materials Letters, 57, 1477–1482. https://doi.org/10.1016/S0167-577X(02)01009-1

5. Brew, D. R. M., & MacKenzie, K. J. D. (2007). Geopolymer synthesis using silica fume and sodium aluminate. Journal of Materials Science, 42(11), 3990–3993.

6. Purdon, A. O. (1940). The action of alkalis on blast-furnace slag. Journal of the Society of Chemical Industry, 59, 191–202.

7. Temuujin, J., van Riessen, A., & MacKenzie, K. J. D. (2010). Preparation and characterisation of fly ash-based geopolymer mortars. Construction and Building Materials, 24, 1906–1910.

8. Temuujin, J., Minjigmaa, A., Davaabal, B., Bayarzul, U., Ankhtuya, A., Jadambaa, Ts., & MacKenzie, K. J. D. (2014). Utilization of radioactive high-calcium Mongolian fly ash for the preparation of alkali-activated geopolymers for safe use as construction materials. Ceramics International, 40, 16475–16483. https://doi.org/10.1016/j.ceramint.2014.07.157

9. Temuujin, J., Davaabal, B., Rentsennorov, U., Odbaatar, E., Enkhbayar, D., Tsend-Ayush, T., Danzandorj, S., Ruescher, C. H., & MacKenzie, K. J. D. (2023). Characterization of alkali-activated materials prepared from continuous attrition and ball-milled fly ashes. Minerals, 13(4), 490. https://doi.org/10.3390/min13040490

10. Lemougna, P. N., MacKenzie, K. J. D., & Chinje Melo, C. F. (2011). Synthesis and thermal properties of inorganic polymers (geopolymers) for structural and refractory applications from volcanic ash. Ceramics International, 37, 3011–3018. https://doi.org/10.1016/j.ceramint.2011.05.002

11. Lemougna, P. N., MacKenzie, K. J. D., Jameson, G. N. L., Rahier, H., & Chinje Melo, U. F. (2013). The role of iron in the formation of inorganic polymers (geopolymers) from volcanic ash: A ⁵⁷Fe Mössbauer spectroscopy study. Journal of Materials Science, 48, 5280–5286. https://doi.org/10.1007/s10853-013-7319-4

12. Waijarean, N., Asavapisit, S., Sombatsompop, K., & MacKenzie, K. J. D. (2014). The effect of the Si/Al ratio on the properties of water treatment residue (WTR)-based geopolymers. Key Engineering Materials, 608, 289–294. https://doi.org/10.4028/www.scientific.net/KEM.608.289

13. Waijarean, N., MacKenzie, K. J. D., Asavapisit, S., Piyaphanuwat, R., & Jameson, G. N. L. (2017). Synthesis and properties of geopolymers based on water treatment residue and their immobilization of some heavy metals. Journal of Materials Science, 52, 7345–7359. https://doi.org/10.1007/s10853-017-0970-4

14. O’Connor, S. J., MacKenzie, K. J. D., Smith, M. E., & Hanna, J. V. (2010). Ion exchange in the charge-balancing sites of aluminosilicate inorganic polymers. Journal of Materials Chemistry, 20, 10234–10240. https://doi.org/10.1039/C0JM01254H

15. Rogers, J. J., MacKenzie, K. J. D., & Trompetter, W. J. (2018). New phosphors synthesised by ion exchange of a metakaolin-based geopolymer. Applied Clay Science, 157, 1–7. https://doi.org/10.1016/j.clay.2018.02.025

16. Rogers, J. J., MacKenzie, K. J. D., Rees, G., & Hanna, J. V. (2018). New phosphors based on the reduction of Eu(III) to Eu(II) in ion-exchanged aluminosilicate and gallium silicate inorganic polymers. Ceramics International, 44, 1110–1119. https://doi.org/10.1016/j.ceramint.2017.10.066

17. Nicholson, C. L., MacKenzie, K. J. D., Murray, B. J., Fletcher, R. A., Brew, D. R. M., & Schmucker, M. (2005). [Conference paper]. Proceedings of the World Geopolymer Conference, St. Quentin, Paris, 31–33.

18. MacKenzie, K. J. D., Brew, D. R. M., Fletcher, R. A., Nicholson, C. L., Vagana, R., & Schmucker, M. (2005). [Conference paper]. Proceedings of the World Geopolymer Conference, St. Quentin, Paris, 41–44.

19. Durant, A. T., MacKenzie, K. J. D., & Maekawa, H. (2011). Synthesis and thermal behaviour of gallium-substituted aluminosilicate inorganic polymers. Journal of the Chemical Society, Dalton Transactions, 40, 4865–4870. https://doi.org/10.1039/C0DT00941E

20. Durant, A. T., & MacKenzie, K. J. D. (2011). Synthesis of sodium and potassium aluminogermanate inorganic polymers. Materials Letters, 65, 2086–2088. https://doi.org/10.1016/j.matlet.2011.04.008

21. MacKenzie, K. J. D., Komphanchai, S., & Vagana, R. (2008). Formation of inorganic polymers (geopolymers) from 2:1 layer lattice aluminosilicates. Journal of the European Ceramic Society, 28, 177–181. https://doi.org/10.1016/j.jeurceramsoc.2007.06.004

22. MacKenzie, K. J. D., Bradley, S., Hanna, J. V., Smith, M. E., et al. (2013). Magnesium analogues of aluminosilicate inorganic polymers (geopolymers) from magnesium minerals. Journal of Materials Science, 48, 1787–1793. https://doi.org/10.1007/s10853-012-6940-y

23. Welter, M., Schmücker, M., & MacKenzie, K. J. D. (2015). Evolution of the fibre-matrix interactions in basalt-fibre-reinforced geopolymer-matrix composites after heating. Journal of Ceramic Science and Technology, 6, 17–24. https://doi.org/10.4416/JSCT2014-00034

24. Alzeer, M., & MacKenzie, K. J. D. (2013). Synthesis and mechanical properties of novel composites of inorganic polymers (geopolymers) with unidirectional natural flax fibres (Phormium tenax). Applied Clay Science, 75–76, 148–152. https://doi.org/10.1016/j.clay.2013.03.010

25. Alzeer, M., & MacKenzie, K. J. D. (2012). Synthesis and mechanical properties of new fibre-reinforced composites of inorganic polymers with natural wool fibres. Journal of Materials Science, 47, 6958–6965. https://doi.org/10.1007/s10853-012-6644-3

26. Fallah, M., MacKenzie, K. J. D., Hanna, J. V., & Page, S. J. (2015). Novel photoactive inorganic polymer composites of inorganic polymers with copper(I) oxide nanoparticles. Journal of Materials Science, 50, 7374–7383. https://doi.org/10.1007/s10853-015-9295-3

27. Falah, M., & MacKenzie, K. J. D. (2015). Synthesis and properties of novel photoactive composites of P25 titanium dioxide and copper(I) oxide with inorganic polymers. Ceramics International, 41, 13702–13708. https://doi.org/10.1016/j.ceramint.2015.07.198

28. Alzeer, M.I.M., MacKenzie, K.J.D., Keyzers, R.A. (2016). Porous aluminosilicate inorganic polymers (geopolymers): a new class of environmentally benign heterogeneous solid acid catalysts. Appl. Catalysis A 524, 173-81. https://doi.org/10.1016/j.jhazmat.2016.06.016

29. Alzeer, M. I. M., MacKenzie, K. J. D., & Keyzers, R. A. (2016). Porous aluminosilicate inorganic polymers (geopolymers): A new class of environmentally benign heterogeneous solid acid catalysts. Applied Catalysis A: General, 524, 173–181. https://doi.org/10.1016/j.apcata.2016.06.024

30. Alzeer, M. I. M., MacKenzie, K. J. D., & Keyzers, R. A. (2017). Facile synthesis of new hierarchical aluminosilicate inorganic polymer solid acids and their catalytic performance in alkylation reactions. Microporous and Mesoporous Materials, 241, 316–325. https://doi.org/10.1016/j.micromeso.2016.12.018

31. Alzeer, M. I. M., & MacKenzie, K. J. D. (2018). Synthesis and catalytic properties of new sustainable aluminosilicate heterogeneous catalysts derived from fly ash. ACS Sustainable Chemistry & Engineering, 6, 5273–5282. https://doi.org/10.1021/acssuschemeng.7b04923

32. MacKenzie, K. J. D., & O’Leary, B. (2009). Inorganic polymers (geopolymers) containing acid-base indicators as possible colour-change humidity indicators. Materials Letters, 63, 230–232. https://doi.org/10.1016/j.matlet.2008.09.053

33. Okada, K., Ooyama, A., Isobe, T., Kameshima, Y., Nakajima, A., & MacKenzie, K. J. D. (2009). Water retention properties of porous geopolymers for use in cooling applications. Journal of the European Ceramic Society, 29, 1917–1923. https://doi.org/10.1016/j.jeurceramsoc.2008.11.006

34. Rasouli, H. R., Golestani Fard, F., Nasab, G. M., MacKenzie, K. J. D., & Shahraki, M. (2015). Fabrication and properties of microporous metakaolin-based geopolymer bodies with polylactic acid (PLA) fibers as pore generators. Ceramics International, 41, 7872–7880. https://doi.org/10.1016/j.ceramint.2015.02.125

35. Alzeer, M., Keyzers, R. A., & MacKenzie, K. J. D. (2014). Inorganic polymers as novel chromatographic stationary phase media. Ceramics International, 40, 3553–3560. DOI provided in source appears incomplete and should be verified.

36. O’Leary, B. G., & MacKenzie, K. J. D. (2015). Inorganic polymers (geopolymers) as precursors for carbothermal reduction and nitridation (CRN) synthesis of SiAlON ceramics. Journal of the European Ceramic Society, 35, 2755–2764. https://doi.org/10.1016/j.jeurceramsoc.2015.03.026

37. MacKenzie, K. J. D., Rahner, N., Smith, M. E., & Wong, A. (2010). Calcium-containing inorganic polymers as potential bioactive materials. Journal of Materials Science, 45, 999–1007. https://doi.org/10.1007/s10853-009-4031-5

38. MacKenzie, K. J. D. (2009). Utilization of non-thermally activated clays in the production of geopolymers. In J. Provis & J. van Deventer (Eds.), Geopolymers: Structure, processing, properties and applications (Chapter 14, pp. 294–314). Woodhead Publishing.

39. Alzeer, M. I. M., & MacKenzie, K. J. D. (2022). Alkali-activated materials as photocatalysts for aqueous pollutant degradation. In T. Luukkonen (Ed.), Alkali-activated materials in environmental technology applications (Chapter 8, pp. 167–194). Elsevier. ISBN 9780323884389.

40. Alzeer, M. I. M., & MacKenzie, K. J. D. (2022). Alkali-activated materials as catalysts in chemical processes. In T. Luukkonen (Ed.), Alkali-activated materials in environmental technology applications (Chapter 16, pp. 355–379). Elsevier. ISBN 9780323884389.

41. Alzeer, M. I. M., & MacKenzie, K. J. D. (2021). Fiber composites of inorganic polymers (geopolymers) reinforced with natural fibers. In I. M. Low & Y. Dong (Eds.), Composite materials: Manufacturing, properties and applications (Chapter 5, pp. 117–147). Elsevier. ISBN 978-0-12-820512-9.

42. MacKenzie, K. J. D. (2017). Inorganic polymers (geopolymers). In Encyclopedia of polymer science and technology (pp. 1–31). Wiley. https://doi.org/10.1002/0471440264.pst165.pub2

43. MacKenzie, K. J. D. (2015). Innovative applications of inorganic polymers (geopolymers). In F. Pacheco-Torgal, J. Labrincha, C. Leonelli, A. Palomo, & P. Chindaprasit (Eds.), Handbook of alkali-activated cements, mortars and concretes (Chapter 28, pp. 777–806). Woodhead Publishing. ISBN 9781782422761.

44. MacKenzie, K. J. D., & Welter, M. (2014). Geopolymer (aluminosilicate) composites: Synthesis, properties and applications. In I. M. Low (Ed.), Advances in ceramic matrix composites (Chapter 18, pp. 445–470). Woodhead Publishing. E-ISBN 978-0-85709-882-5.